Wouter Oosthuizen

Wouter Oosthuizen is the inventor of a critically needed OPEN SOURCE fuel saving hydroxy booster.

Wouter has done this open source research and development in order to advance education and reduce emissions. Wouter also intends to do further research and is committed to bringing practical open source water fuel cell technologies to the public.

He is also providing the public service of making kits available for those who cannot build boosters for their cars, trucks or motorcycles.

Water Fuel for All Booster's

Pictured left to right is the WaterfuelForAll Deluxe - Weight 4.1kg Height including cap 28cm (11") Width 11.5cm (4.5") max 30A, 25A continuous, 1.9-2.5 lpm @ 25A.

WaterfuelForAll Standard - Weight 3.3kg Height including cap 24cm (9.5") Width 11.5cm (4.5") WaterfuelForall Standard max 25A, 20A continuous, 1.5-2.0 lpm @ 20A .

Heavy duty bubbler - Weight 0.8kg Height 27cm (10.5") Width excluding connectors 10cm (4")

Standard water trap/bubbler - Weight 0.18kg Height 20cm (8") Width excluding connectors 9cm (3.5")

Wouter also has a Super Delux verison Tailored for Truckers, please enquire by emailing Wouter.The above design is currently the most compact versatile, powerful and low cost open source booster design.

PLEASE MENTION YOU HAVE BEEN DIRECTED FROM THE PANACEA PAGE WHEN ORDERING A BOOSTER, ORDERING CAN BE DONE BY USING WOUTER EMAIL MENTIONED AT THE TOP OF THE PAGE.

The water fuel for all booster is often referred to as a Hydroxy booster and consists of a container of distilled water with a conductive additive. When an electric current is passed through the water it produces a gas mix commonly referred to as hydroxy. This hydroxy mix improves the quality of the burn inside the combustion chamber while reducing CO2 and other harmful emissions coming out of the exhaust.

This improvement in burn quality makes your engine run more powerfully and smooth while reducing carbon deposits which have built up inside over its working life. The hydroxy output of the booster replaces a portion of the gasoline normally consumed by your engine. Typical mileage gain results have been averaging around 20+% using this design.

The water fuel for all booster is one which Wouter designed, built and tested. It is compact, simple to construct and it is very effective. This device has been bench tested to work with no heating issues after 10 hours of operation. Wouter is currently offering these units for sale and intends to use the revenue raised to do further research and development.

These concepts have been in existence for a very long time. What makes the water fuel for all booster device unique is what's inside.The design produces 2LPM of hydroxy gas using 20 amps of your 12VDC vehicles electrical system. Wouter has kept these units at LOW cost and is currently offering them for for 225USD (excluding shipping). Please use the email link above to order direct, if any problems please email us.

Wouter is also involved in other clean energy research and development and intends to disclose his results open source for all faculties and the public to benefit. At the moment Wouter is involved in an a few 100% water fuled projects

Despite Wouter having a working available device and R and D potential, the device has no faculty recognition or support.Wouter requires endorsement and sponsorship to continue his research and development projects. Wouter contributions need a grant backed research and development environment to flourish and will be submitted into faculty study and support in the proposed granted Panacea research and development center.

These systems can be developed further to allow for a pure clean stand alone water fuel energy system. Wouter is unable to finance all of the research himself like the rest of the registered technologies presented.

Panacea will pledge Grants and engineers support towards Wouter's R&D once granted. If you're a member of the public or a scientific group who can aid in grants for the center or help Wouter please contact Panacea.